EN
- Overview
- Recommended Products
- 2:1 shrink ratio
- Flexible
- Flame-retardant (colors only)
- Continuous operating temperature: -55℃ to 135℃
- Shrink temperature: 70℃ min.
- Full recovery temperature: 110℃ min.
- Standard Color: Black(-0), red(-2), yellow(-4), green(-5), blue(-6), white(-9).
- Special colors and sizes are available upon request.
Features
Operating & Installation
Introduction
Widely used for insulation, strain relief of wire terminations and electrical connections. Also suitable for components or cables with large size differences in insulation protection, connection coating and terminal treatment.
Product Properties
| Property | Requirement | Test Method |
| Tensile Strength | 10.4MPa min. | ASTM D2671 |
| Ultimate Elongation | 200% min. | ASTM D2671 |
| Low Temperature Flexibility | No cracking. | ASTM D2671 |
| (4h at -55℃) | ||
| Heat Shock(4h at 200℃) | No dripping, flowing or cracking. | ASTM D2671 |
|
Heat Resistance(168h at 158℃) followed by: Tensile Strength Ultimate Elongation |
70% of original min. 100% min. |
ASTM D2671 |
| Dielectric Strength | 19.7kV/mm min. | ASTM D2671 |
| Volume Resistivity | 1014 Ω·cm min. | ASTM D2671 |
Product Dimensions
Metric Sizes
| Size | As Supplied | After Recovery |
Standard Length (m/spool) |
|
| I.D. | I.D. (max.) | Wall Thickness(min.) | ||
| 1 | 1.5±0.3 | 0.6 | 0.33 | 200 |
| 1.5 | 2.0±0.3 | 0.75 | 0.36 | 200 |
| 2 | 2.5±0.3 | 1 | 0.44 | 200 |
| 2.5 | 3.0±0.3 | 1.25 | 0.44 | 200 |
| 3 | 3.5±0.3 | 1.5 | 0.44 | 200 |
| 3.5 | 4.0±0.3 | 1.75 | 0.44 | 200 |
| 4 | 4.5±0.3 | 2 | 0.44 | 200 |
| 4.5 | 5.0±0.3 | 2.25 | 0.44 | 200 |
| 5 | 5.5±0.3 | 2.5 | 0.56 | 100 |
| 6 | 6.5±0.3 | 3 | 0.56 | 100 |
| 7 | 7.6±0.3 | 3.5 | 0.56 | 100 |
| 8 | 8.6±0.3 | 4 | 0.56 | 100 |
| 9 | 9.6±0.3 | 4.5 | 0.56 | 100 |
| 10 | 10.7±0.4 | 5 | 0.56 | 100 |
| 11 | 11.7±0.4 | 5.5 | 0.56 | 100 |
| 12 | 12.7±0.4 | 6 | 0.56 | 100 |
| 13 | 13.7±0.4 | 6.5 | 0.69 | 100 |
| 14 | 14.7±0.4 | 7 | 0.69 | 100 |
| 15 | 15.7±0.5 | 7.5 | 0.69 | 100 |
| 16 | 16.7±0.5 | 8 | 0.69 | 100 |
| 18 | 19.0±0.5 | 9 | 0.77 | 100 |
| 20 | 21.0±0.5 | 10 | 0.77 | 50 |
| 22 | 23.0±0.5 | 11 | 0.77 | 50 |
| 25 | 26.0±1.0 | 12.5 | 0.87 | 50 |
| 28 | 29.0±1.0 | 14 | 0.87 | 50 |
| 30 | 31.5±1.0 | 15 | 0.87 | 50 |
| 35 | 36.5±1.0 | 17.5 | 0.97 | 50 |
| 40 | 41.5±1.0 | 20 | 0.97 | 50 |
| 50 | 51.5±1.0 | 25 | 0.97 | 50 |
Dimension in mm, inches in brackets. I.D.=Insider Diameter
Imperial Sizes
| Size | As Supplied | After Recovery |
Standard Length (m/spool) |
|
| I.D. | I.D. (max.) | Wall Thickness(min.) | ||
| 3/64 | 1.2（0.046） | 0.6（0.023） | 0.40±0.08（0.016±0.003） | 200 |
| 1/16 | 1.6（0.063） | 0.8（0.031） | 0.43±0.08（0.017±0.003） | 200 |
| 3/32 | 2.4（0.093） | 1.2（0.046） | 0.51±0.08（0.020±0.003） | 200 |
| 1/8 | 3.2（0.125） | 1.6（0.062） | 0.51±0.08（0.020±0.003） | 200 |
| 3/16 | 4.8（0.187） | 2.4（0.093） | 0.51±0.08（0.020±0.003） | 100 |
| 1/4 | 6.4（0.250） | 3.2（0.125） | 0.64±0.08（0.025±0.003） | 100 |
| 3/8 | 9.6（0.375） | 4.8（0.187） | 0.64±0.08（0.025±0.003） | 100 |
| 1/2 | 12.7（0.500） | 6.4（0.250） | 0.64±0.08（0.025±0.003） | 100 |
| 3/4 | 19.1（0.750） | 9.5（0.375） | 0.76±0.08（0.030±0.003） | 100 |
| 1 | 25.4（1.000） | 12.7（0.500） | 0.89±0.12（0.035±0.005） | 50 |
| 1 1/4 | 31.8（1.250） | 15.9（0.625） | 1.02±0.15（0.040±0.006） | 50 |
| 1 1/2 | 38.1（1.500） | 19.0（0.750） | 1.02±0.15（0.040±0.006） | 50 |
| 2 | 50.8（2.000） | 25.4（1.000） | 1.14±0.16（0.045±0.007） | 50 |
Dimension in mm, inches in brackets. I.D.=Insider Diameter
