EN
K-102 New Material Heat Shrinkable Polyolefin Tubing Flexible Insulation Protection 1-80MM
Appurtenance:
- Overview
- Recommended Products
- Shrink ratio:2 :1
- Operating temperature range: -45℃~125℃
- Minimum shrink temperature: 80℃
- Minimum fully recovery temperature:120℃
- Conform to RoHS 2.0 ( (EU) 2015/863)
- Standard color: black,white,red,blue,green,yellow.
Features
| Property | Test method | Requirement | |
| Longitudinal shrinkage | ASTM D 2671 | −10% ~ 10% | |
| Tensile strength | ASTM D 638 | ≥10.4MPa | |
| Ultimate elongation | ASTM D 638 | ≥200% | |
| Aging 158°C, 168hrs | Tensile strength after aging | ASTM D 638 | ≥7.3Mpa |
| Ultimate elongation after aging | ≥100% | ||
| Dielectric voltage withstand | UL 224 | 2500Vac, 60Hz no breakdown | |
| Volume resistivity | ASTM D 876 | ≥10¹⁴Ω·cm | |
| Heat shock, 200°C, 4hrs | ASTM D 2671 | No cracking, flow or dripping | |
Introduction
KAIHENG NEW MATERIAL K-102 is irradiated crosslinking polyolefin heat-shrinkable tubing suitable for environmentally friendly application. It contains no added halogens, and exhibits good mechanical and fluid resistance properties with low evolution of acid gases.
Product Dimensions
| Size | As supplied(mm) | After recovery(mm) | Standard Length (m/spool) | ||
| (mm) | Inside diameter | Wall thickness | Inside diameter (max.) | Wall thickness (min.) | |
| Φ0.8 | 1.0±0.2 | 0.15±0.05 | 0.6 | 0.25±0.05 | 200/400 |
| Φ1.0 | 1.5±0.3 | 0.18±0.06 | 0.7 | 0.33±0.08 | 200/400 |
| Φ1.5 | 2.0±0.3 | 0.20±0.08 | 0.8 | 0.36±0.08 | 200/400 |
| Φ2.0 | 2.5±0.3 | 0.20±0.08 | 1 | 0.42±0.08 | 200/400 |
| Φ2.5 | 3.0±0.3 | 0.22±0.08 | 1.25 | 0.44±0.08 | 200/400 |
| Φ3.0 | 3.5±0.3 | 0.25±0.08 | 1.5 | 0.44±0.08 | 200 |
| Φ3.5 | 4.0±0.3 | 0.25±0.08 | 1.75 | 0.44±0.08 | 200 |
| Φ4.0 | 4.5±0.3 | 0.25±0.08 | 2 | 0.44±0.08 | 200 |
| Φ4.5 | 5.0±0.3 | 0.25±0.08 | 2.25 | 0.44±0.08 | 200 |
| Φ5.0 | 5.5±0.3 | 0.25±0.08 | 2.5 | 0.50±0.08 | 100 |
| Φ5.5 | 6.0±0.3 | 0.25±0.08 | 2.75 | 0.50±0.08 | 100 |
| Φ6.0 | 6.5±0.3 | 0.28±0.10 | 3 | 0.54±0.10 | 100 |
| Φ7.0 | 7.6±0.3 | 0.30±0.10 | 3.5 | 0.56±0.10 | 100 |
| Φ8.0 | 8.6±0.3 | 0.30±0.10 | 4 | 0.56±0.10 | 100 |
| Φ9.0 | 9.6±0.4 | 0.30±0.10 | 4.5 | 0.56±0.10 | 100 |
| Φ10.0 | 10.7±0.4 | 0.30±0.10 | 5 | 0.56±0.10 | 100 |
| Φ12.0 | 12.7±0.4 | 0.30±0.12 | 6 | 0.56±0.12 | 100 |
| Φ13.0 | 13.7±0.4 | 0.35±0.12 | 6.5 | 0.65±0.12 | 100 |
| Φ14.0 | 14.7±0.4 | 0.35±0.12 | 7 | 0.65±0.12 | 100 |
| Φ15.0 | 15.7±0.5 | 0.35±0.12 | 7.5 | 0.65±0.12 | 100 |
| Φ16.0 | 16.7±0.5 | 0.35±0.12 | 8 | 0.65±0.12 | 100 |
| Φ17.0 | 17.7±0.5 | 0.35±0.12 | 8.5 | 0.65±0.12 | 100 |
| Φ18.0 | 19.0±0.5 | 0.40±0.12 | 9 | 0.77±0.15 | 100 |
| Φ20.0 | 21.0±0.5 | 0.40±0.15 | 10 | 0.77±0.15 | 100 |
| Φ22.0 | 23.0±0.5 | 0.40±0.15 | 11 | 0.77±0.15 | 100 |
| Φ25.0 | 26.0±1.0 | 0.45±0.15 | 12.5 | 0.87±0.15 | 50 |
| Φ28.0 | 29.0±1.0 | 0.45±0.15 | 14 | 0.87±0.15 | 50 |
| Φ30.0 | 31.5±1.0 | 0.45±0.15 | 15 | 0.87±0.15 | 50 |
| Φ35.0 | 36.5±1.0 | 0.50±0.20 | 17.5 | 0.97±0.15 | 50 |
| Φ38.0 | 39.5±1.0 | 0.50±0.20 | 19 | 0.97±0.20 | 50 |
| Φ40.0 | 42.0±1.5 | 0.50±0.20 | 20 | 0.97±0.20 | 50 |
| Φ50.0 | 53.0±2.0 | 0.55±0.20 | 25 | 1.00±0.20 | 25 |
